This task details how to use the RELUX lighting interface in rooms with existing lighting fixtures that were inserted as an arrangement, using lighting fixture symbols from the BBES symbol library.

1. Select (RELFUX) tool. Click datapoint and right mouse click inside a room where you want to perform a lighting calculation. Opens the Lighting Analysis dialog.
   
   
   
   Click BBES->REFLUX.
   RELUX pops up the message shown below, since it does not recognize the lighting fixtures.

   Could not read LCD file.
   Please reselect the luminare before calculation.
               [OK] 

   Click OK.

   RELUX run in the background and displays the room including placeholders for lighting fixtures. It does recognize the exact location of insertion points of lighting fixtures.

2. Next, "Select All" using Edit > Select All(or <Ctrl>+<A>). All lighting fixtures in the room are selected.
   
   
   
3. First you need to select a lighting fixture. Click Luminaires > Selection menu option. Opens the Luminaire selection dialog.
   
   
   
4. First, click on the Luminaire type tab. The basic luminiaire data is displayed in the window to the right.
5. Next, click on the Luminaire selection tab. Select Company, Luminaire name and Item number.
   
   
   
   Then click Replace>>.
   The existing luminaire information is overwritten/replaced. Click OK to apply.

   
   
   

   The new luminaires are replacing the old and are placed on the exact same positions.
6. Next, make sure to save the RELUX file, use File > Save.
   Note: It is required to save the RELUX file for RELUX interface to work in Electrical discipline.
7. Next step, close RELUX. In the Lighting Analysis dialog, click RELUX->BBES. Opes the Lighting Calculation Symbol Matchtable dialog.
   
   
   
   The matchtable creates a connection between the lighting fixture that is imported from RELUX into the Electrical discipline drawing. This only needs to be done the first time a new lighting fixture is imported, Electrical discipline stores the link information (which can be changed at any later time).
   The Symbol Matchtable also offers the following options:

   • Import 2D dimensions: imports lighting fixture symbol 2D dimensions from manufacturer database
   • Import 3D dimensions: imports lighting fixture symbol 3D dimensions from manufacturer database
   • Import load: Imports lighting fixture load information from manufacturer database

   The red "X" placeholder symbol indicates that there is no match for this luminaire available yet.

8. Click Symbol. Opens the Symbol Manager dialog.
   
   
   
9. Select the Closed 3'1" symbol in the TUBES CLOSED section, and click OK. The RELUX lighting fixture is now linked to a lighting fixture symbol. You will see the symbols in place of red "X" placeholder in the Symbol Matchtable.
10. Click OK in Symbol Matchtable dialog. Electrical discipline asks for confirmation to overwrite existing symbols.

    Erase existing symbols?
                [Yes]  [No] 

    Click Yes. The lighting fixtures are then replaced in the drawing.
    
    
    

3D visualisation